Tools
Move the numbers and see what a purity figure does and does not tell you, then test yourself on which question each line of a report answers, and check a report against two published cutoffs.
Scope: documentation education about reading analytical reports. Nothing here describes or recommends use of any substance. Example values are illustrative, not from any real product. Compound Brief is published by DAAVY Research.
HPLC purity is the main peak's share of the detected peak area, read at one UV wavelength. Net peptide content is the share of the powder that is peptide. Set both and see how much of a vial's powder is the target compound. Background: purity vs. content.
The chromatogram is a drawing, not data: the total peak area is held constant, so a lower purity value makes the main peak smaller and the other peaks larger, and the non-peptide share never appears on it at all. Moving the powder or content sliders does not change it, because an HPLC trace only shows the peptide-related share. That gap is why two reports with the same purity can describe vials holding different amounts of peptide. Our net-peptide-content article puts content commonly around 70 to 90 percent; treat that range as that article's statement, not a measured standard.
Enter two numbers from a report. The page applies the two acceptance models used in a 2026 preprint that analyzed 6,285 third-party test reports on research-grade peptides (Mendias and Awan, not peer reviewed). Those cutoffs are the authors' choice, not regulatory standards. Example numbers below are illustrative. Full write-up: 6,285 peptide test reports.
Under these two models, the preprint reported 58.4% of samples meeting the first and 28.9% meeting the second, so the same reports gave 41.6% or 71.1% failing depending on the cutoff. Passing says nothing about identity, endotoxin, sterility or stability.
Email sign-ups are paused.